Industrial Style Partitions

Industrial style room dividers have become very fashionable lately. The design allows the end-user to divide up an area for greater privacy whilst benefiting from the sleek, modern and stylish aesthetic that this type of partitioning provides.

Cost-Effective Solutions

The PRO-office single glazed partitioning system design allows you to achieve this effect quickly and cost-effectively. Our banded glazing transom strip is supplied in 3050mm lengths enabling you to cut it to the exact size required onsite, ensuring a sleek finish once installed.

We stock all the parts you need to install the Industrial style partitions, including glass cleaners and primers and banded glazing tape. The installation stages of our banded glazing systems are simple. Cut the banded transom to the length required, clean the glass with our SF Glass Cleaner, then prime the glass with our GLS Primer. Cut the glazing tape to the required size and adhere it to the banded transom profile. Then attach the other side of the glazing tape to the glass panel. Remember that this is heavy-duty bonding tape, so once attached to the glass, it is permanent. Please ensure the glazing tape has adhered to the correct point required on the glass.

Saving Time & Money

Our banded glazing rapidly reduces installation times and is supplied in lengths to allow direct fixing to large sheets of glass, so fewer panels are required. Not only is the result aesthetically pleasing, but it is also cost-effective. Our banded glazing stock is available for delivery within 24-48 hours.

---