When installing demountable partitioning walls, the correct finish is crucial for the client. Whether you are looking to create a productive, warm, friendly work
environment or display your corporate colours to the world, the chosen finish will dictate the final aesthetic's overall quality.
If the finish is not up to standard, it will resonate throughout the entire installation.
We only use the best painters possible to ensure our product finishes are of the absolute highest quality. Our painters are local to us, allowing us to keep processing time to a minimum. All of our products are meticulously quality checked before shipping out. At present, we hold stock in large quantities of what we call our standard finishes. These finishes include Black RAL9005, White RAL9010, Grey RAL9006 and Anthracite Grey RAL7016.
The gloss level used when painting aluminium extrusions can dramatically alter the overall finish. So much so that if you put two lengths of material with different gloss levels next to each other,
you will immediately see a huge difference. All of our sections are painted with a gloss level of 30% to ensure uniformity across the entire product range. If you are looking for a different colour
from those detailed above, we can paint our sections in any of the 1625 colours currently in the RAL colour range.
Should you require something a little bit special for your partitioning installation, we can anodize our sections for you and supply an anodizing finish in an array of colours with a standard anodizing film thickness (AA05).
PRO-office aluminium profiles are all available in the following finishes: Black RAL9005, Grey RAL9006, White RAL9010, Anthracite Grey RAL7016 & mill finish as standard.
PRO-office SG single glazed is able to accept glass from 10mm through to 12.8mm. PRO-office DG double glazed is able to accept glass thicknesses ranging from 6mm all the way through to12.8mm
Our single glazed & double glazed systems are able to fully integrate with each other.
Need some advice?
Planning a new office?