Ordering materials from one supplier is always easier than having to shop around with various suppliers. With this in mind, we also stock glazing gaskets for the PRO-office SG system - reducing time for you and also reducing delivery costs.
We stock I-Line gaskets for use with 10 – 10.8m glass and 12 – 12.8mm glass. The I-line glazing gasket is an incredible addition to our system, allowing you to install our partitioning system and glaze it with an almost seamless finish. The types for the profiles we stock are in-line glass joints, 90º corner joints, 90° abutments, 3-way glass joints, 2-way glass joints for 90° junctions and 2-way glass joints for 135° bends. All of the above profiles are supplied in 3000mm lengths with black or clear options depending on the finish you wish to achieve.
We also stock tear-off glazing gaskets for several different glass thicknesses. Our CGD110 is for 10 – 10.8mm glass and supplied in a 100m tub. Our CGD120 is for 12 – 12.8mm glass and supplied in 200m tubs. We are continually striving to make our system quicker to install to reduce installation time on site. With ongoing improvements, developments and investment in our glazing systems, we have produced a custom clip in the gasket for our head & wall sections. Again this gasket can be used when installing 10mm through to 12.8mm glass.
PRO-office aluminium profiles are all available in the following finishes: Black RAL9005, Grey RAL9006, White RAL9010, Anthracite Grey RAL7016 & mill finish as standard.
PRO-office SG single glazed is able to accept glass from 10mm through to 12.8mm. PRO-office DG double glazed is able to accept glass thicknesses ranging from 6mm all the way through to 12.8mm
Our single glazed & double glazed systems are able to fully integrate with each other.
Need some advice?
Planning a new office?