Smiths PRO-office specialises in supplying partition wall and door systems to the office fit-out market.
Smiths PRO-trim is a stockist and supplier of tile trim and dryline wall trim products. Our extensive stock is available via our UK wide distribution network. We welcome order enquiries from merchants and showroom businesses.
Our I-Line dry joint range includes three corner variants that allow you to create seamless glass to glass corner joints that are quick and easy to install due to incorporating high bond self-adhesive tape in the design.
Utilising this product creates a sleek, clean 90° joint. The effect is achieved by installing the dry joint over the end of one glass panel, and the other side is attached to the face of the opposing panel. Our product is suitable for glass thicknesses from 10mm to 12.8mm glass.
The profile also allows you to create a 90° joint. However, in this instance, the glass ends adhere to either side of the joint; the profile then makes the 90° angle. This profile protects the ends of each of the glass panels. Suitable for use with glass sizes ranging from 10mm through to 12.8mm.
The I-Line corner joint product finds use in a faceted glazed installation and represents a quick way to install two glass panels at a 45° angle. The product caters for glass thicknesses from 10mm to 12.8mm.
Glass thickness range - 10mm, 10.8mm, 12mm and 12.8mm. Finish - clear glass.
Glass thickness range - 10mm, 10.8mm, 12mm and 12.8mm. Finish - clear glass.
Glass thickness range - 10mm, 10.8mm, 12mm and 12.8mm. Finish - clear glass.
You are currently here:
Dry Joints → I-Line Range → I-Line Corner Joints